Woodwop 5.0 Tutorial

The woodWOP 5.0 interface centers on a large where the workpiece, machining steps, and vacuum cups are displayed.

He switched to the tab. This was the meat of the program. He needed to tell the machine how deep to cut. He selected a contour he had drawn. A dialog box appeared, demanding specifics.

To get started with WoodWOP 5.0, follow these steps: woodwop 5.0 tutorial

Every project starts with the Workpiece icon. You must define the "raw" dimensions before adding cuts. Dimension along the X-axis. Width (B): Dimension along the Y-axis. Thickness (D): Part depth (Z-axis).

Select your tool (e.g., a 12mm down-shear nesting router bit). The woodWOP 5

Select the drill icon, input the X/Y coordinates, and set the depth.

Let’s say we want to machine a simple rectangle out of the center of this panel, or perhaps trim the panel to size using a saw aggregate. He needed to tell the machine how deep to cut

: If you frequently use a specific pattern—like a bolt hole pattern or a custom hinge cutout—you can save it as a Component . These can be dragged and dropped into new programs to save time.