Digi Sm-500 Scale User Manual |best| -

Remove the stainless steel top platter daily and wash it with mild soapy water. Never spray liquids directly onto the scale body.

Close the print head lever firmly until it clicks into place. Press the key to align the labels properly. Basic Daily Operations

Incorrectly loaded labels cause paper jams, blank printouts, and localized adhesive buildup on the roller mechanics. Loading Label or Receipt Rolls

Thread the paper backing beneath the thermal printhead block and around the guide rollers.

A: “Zero” resets the scale to zero when the pan is empty. “Tare” subtracts the weight of a container and sets that as the new zero point. Tare allows multiple containers in sequence. digi sm-500 scale user manual

Proper physical setup prevents measurement errors and protects the internal load cell from permanent calibration damage. Physical Placement

: Detailed hardware specs, including printing speeds (up to 150mm/s), memory capacity (2MB standard, upgradeable to 10MB), and interface options like Ethernet and RS-232C. Initial Setup

Clear the platter area. Check for drafts or physical contact with surrounding walls. Re-zero the scale. Label roll installed backward or wrong paper type.

Slide the label roll onto the supply spindle, ensuring the labels feed face-up. Remove the stainless steel top platter daily and

Use canned compressed air to clear paper dust away from the reflective gap sensor and peel sensor. To help you get the most out of your scale, tell me:

Place the item onto the center of the stainless steel platter. Enter the desired using the numeric keypad. Press the [PLU] key to fetch the product data.

Locate the power switch on the side or bottom of the unit. Allow the scale to warm up and stabilize until the display shows a zero reading.

Locate the physical sheet of preset speed keys on the keyboard layout. Press the designated key for the product (e.g., "Apples"). 4. Programming and PLU Configuration Press the key to align the labels properly

Locate the physical calibration switch (usually underneath the scale base or behind a sealed plate).

Daily operators must master basic weighing, taring, and price calculating functions to keep lines moving. Standard Weighing and Label Printing Verify the scale display reads zero ( 0.000 ).

Proper setup is crucial for accurate performance. After unboxing, ensure the following: