Mikrotik L2tp Server Setup Full ^new^ Jun 2026

: Enter the IPsec Secret configured in Step 3. Type of sign-in info : User name and password.

Attempt 3 /interface l2tp-server server set enabled=yes authentication=mschap1,mschap2,chap use-ipsec=required ipsec-secret=Test / MikroTik community forum L2TP/IPsec Configuration with RouterOS to work with Android

The profile defines how clients are treated after authentication—IP assignment, DNS, and routing. mikrotik l2tp server setup full

The profile defines the "rules" for the connection, such as encryption and the gateway address. Go to > Profiles . Click + to create a new profile. Name : l2tp-profile

/ip ipsec peer add name=l2tp-peers \ address=0.0.0.0/0 \ port=500 \ auth-method=pre-shared-key \ secret=YourSharedSecretKey123 \ generate-policy=port-strict \ exchange-mode=main-l2tp \ send-initial-contact=yes : Enter the IPsec Secret configured in Step 3

Before enabling the server, you need to define the "home" for your VPN clients—their IP addresses and DNS settings. Enable Cloud DDNS (Optional but Recommended): If your WAN IP changes, use MikroTik's built-in DDNS. Navigate to Enable DDNS , and click Create an IP Pool:

Older clients (e.g., Windows 7 without updates) may fail with SHA256. If needed, add sha1 as a secondary option, but understand this reduces security. The profile defines the "rules" for the connection,

Go to > Firewall > Filter Rules . Ensure these newly created rules are moved above any generic "drop all from WAN" or "drop input" rules. MikroTik processes firewall rules from top to bottom. Step 6: Configure Proxy ARP (Optional but Recommended)

/ppp profile add name=l2tp-profile local-address=192.168.100.1 remote-address=l2tp-pool dns-server=8.8.8.8,1.1.1.1 use-encryption=required