Intex It-305wc Driver For Windows 10 64 Bit Jun 2026

Intex IT-305WC (also known as the Night Vision 300K/600K) is a legacy webcam that typically relies on basic drivers included with Windows or installed via Compatibility Mode for newer systems like Windows 10. Key Features and Specifications Resolution: Offers a base video capture resolution of 480p (640x480) with an interpolated still image resolution of up to 16.0 Megapixels Frame Rate: Supports smooth video streaming at up to , which helps prevent choppy images during movement. Night Vision:

: 32-bit (x86) legacy drivers cannot communicate with a 64-bit kernel without emulation or specific compatibility layers.

Check the box labeled "Run this program in compatibility mode for" and select Windows 7 or Windows XP (Service Pack 3) from the dropdown list.

Since Intex official driver sites might not hold updated drivers for this specific model, you may need to use compatible drivers. Method 1: Manually Update via Device Manager (Recommended) This is the safest method to install a compatible driver. Right-click the button and select Device Manager . Expand Cameras or Imaging Devices . intex it-305wc driver for windows 10 64 bit

Here’s a step-by-step guide to installing the IT-305WC driver, starting with the methods that are considered the safest:

into a (avoid USB 3.0 blue ports for better compatibility). Right-click the Start button and select Device Manager .

The is an older webcam model that was primarily designed for Windows XP, Vista, and 7. While there is no official native Windows 10 64-bit driver from the manufacturer, many users have successfully used it on modern systems using compatibility mode . 🛠️ Compatibility & Installation Intex IT-305WC (also known as the Night Vision

Intex IT-305WC Driver for Windows 10 64-Bit: Download and Installation Guide

If the camera is installed but not functioning properly, try these troubleshooting steps:

| Operating System | Compatibility | Solution | |---|---|---| | Windows XP | Full support | Native drivers available | | Windows Vista | Full support | Native drivers available | | Windows 7 32/64-bit | Works with limitations | May require compatibility mode | | Windows 8/8.1 64-bit | No official drivers | Compatibility mode required | | Windows 10 64-bit | No official drivers | Compatibility mode required | | Windows 11 | Not tested | Compatibility mode may work | | Linux | Works with community drivers | ZC0303 chipset is supported | Check the box labeled "Run this program in

Your computer will boot normally into Windows 10, but will now allow unsigned driver deployment. Step 3: Run the Installer in Compatibility Mode

To get it working on a modern Windows 10 system, you can use the following methods: Method 1: Use Windows Update (Recommended)

The version of Windows 10 is fundamentally different from 32-bit versions. It uses stricter driver signature enforcement, Kernel Patch Protection (KPP), and requires drivers to be compiled specifically for 64-bit architecture. Here’s why the Intex IT-305WC driver for Windows 10 64 bit is critical:

Check "Run this program as an administrator" . Apply and Run: Click Apply , then OK . Run the setup file. 3. Verify in Device Manager After installation, verify the webcam is working: Right-click the Start menu and select Device Manager . Expand Cameras or Imaging Devices . If you see " Intex IT-305WC