Интеллектуальная платформа защищённой разработки приложений СолидЛаб предназначена для поиска и анализа недостатков в исходном коде с целью повышения уровня защищённости разрабатываемых информационных систем. Модули Платформы выполняют инструментальный анализ защищённости в процессе разработки, найденные недостатки передаются в единый интерфейс для управления находками и последующей приоритизации задач.
The Erhardt-Leimer Do 3001 is a manual control system designed for tension control and web guiding applications. It provides a precise and reliable way to control web tension, alignment, and speed. The system consists of a control unit, sensors, and actuators that work together to maintain optimal web handling.
For linear movements or specific actuators, use the Elbody software tool
Activate the "Automatic" mode to begin web guiding.
The DO 3001 system operates on a closed-loop control principle. It continuously measures the current position of the web, compares it to the target position, and dynamically adjusts the mechanical guiding components to correct any deviation. Core System Components Erhardt-leimer Do 3001 Manual
Move the web edge manually through the field of view. Check the controller display to ensure the measurement readout transitions smoothly from 0% (uncovered) to 100% (fully covered). 4. Maintenance Protocols
Trigger the command. The sensor scans the optical contrast and locks onto the sharpest transition signal.
Choose the appropriate sensor (e.g., infrared, ultrasonic, or line sensor) based on the material. The Erhardt-Leimer Do 3001 is a manual control
Plug the sensor cables into the specialized sensor ports. If using dual sensors for center-guiding, verify which sensor is plugged into Channel 1 (Left) and Channel 2 (Right).
Remove all material from the sensor’s measuring path so it only scans the exposed background.
If you operate a large converting line, email E+L support directly. Provide the serial number (found on the side of the aluminum housing). They will often send a PDF for free, though they will push an upgrade to the series. For linear movements or specific actuators, use the
Erhardt+Leimer DO 3001 Manual: A Comprehensive Guide to Web Guiding Operation
Always routing the sensor cables away from high-voltage AC lines, frequency inverters, and motor cables to prevent electromagnetic interference (EMI). Use original E+L shielded cabling for optimal data integrity. 4. Commissioning and Calibration (Step-by-Step)
A common warning repeated in the manual: Never operate the guide without web tension – otherwise the actuator may over-travel and damage the mechanism.
According to the ELWINDER documentation, the actuator needs to correct the infeed rail immediately.