Never use firmware for a different model, even if the brand is the same. Using the wrong firmware will "brick" (permanently damage) your box.
Preparation
Ensure you back up any important data or app settings, as a firmware install typically performs a factory reset, wiping the internal storage. How to Install Firmware via USB Burning Tool android tv box firmware download install
An Android TV box can turn any standard television into a feature-rich smart TV. However, outdated firmware, system glitches, or a slow interface can severely limit your viewing experience. Upgrading or reinstalling your device's firmware resolves these software bugs, improves system performance, and unlocks new features.
Installing the wrong or corrupted firmware can brick (render unusable) your device. Always match firmware exactly to your box’s model, hardware revision, and SoC (System on Chip). Never use firmware for a different model, even
Ensure your TV box remains plugged into a reliable power outlet throughout the process. A power loss mid-flash will brick the device.
| Error | Likely Cause | Fix | |-------|--------------|-----| | | Wrong firmware or bad USB cable | Re-import img. Use a high-quality USB A-A cable (shorter than 3ft). | | PC does not detect box | Driver not installed or wrong port | Reinstall drivers. Use USB 2.0 port on PC. Try another USB port on box. | | Stuck at 98% – “Read item data fail” | NAND memory corruption | Select “Erase Flash” -> “Force Erase All” (warning: erases bootloader). | | Box boots to recovery loop | Boot partition mismatch | Reflash with erase bootloader enabled, then reflash bootloader separately. | | No Wi-Fi after flash | You flashed firmware for a different Wi-Fi chip | Find firmware matching your chip (e.g., RTL8723 vs AP6212). | | Remote control not working | Remote config file missing | Root the box, replace remote.conf or remote.tab1 in /etc/ . | How to Install Firmware via USB Burning Tool
Keep holding the button for 10–15 seconds until the Android recovery screen appears on your TV.