| Feature | v5.1916 (Legacy) | v5.2404.00.000 (Current) | |---------|------------------|----------------------------| | Android 14 scatter | ❌ | ✅ | | USB 3.0 SuperSpeed | ❌ | ✅ | | auth_sv5 support | ❌ | ✅ | | UFS 4.0 flashing | ❌ | ✅ | | Win 11 native | ⚠️ Partial | ✅ Full |
Ensure you have downloaded the correct, official stock firmware matching your precise device model. Step-by-Step Instructions
SPFlash Tool (Smart Phone Flash Tool) is a lightweight but powerful application used to bridge the gap between your PC and MediaTek-based smartphones. Version 5.2404.00.000 is an iterative update designed to fix bugs found in earlier v5 releases and provide better compatibility with modern partitions. Key Features
The progress bar at the bottom will turn red, then yellow. Once a green checkmark circle appears, the process is complete. Unplug your device and reboot. Safety Precautions and Tips Download SPFlash Tool version 5.2404.00.000
: If your device still boots, back up your IMEI data via a root explorer or custom recovery before attempting a flash.
Before you proceed with the download, here is why this version matters:
Flash custom recoveries like TWRP or OrangeFox. Technical Requirements | Feature | v5
Ensure your phone has at least 50% charge to prevent it from dying mid-flash.
It is the go-to solution for fixing a "hard bricked" phone (a device that won't even turn on) or for downgrading software versions.
| Error | Meaning & Solution | | :--- | :--- | | | The connection was interrupted. Often resolved by using a different USB cable, a USB 2.0 port instead of 3.0, or reinstalling the VCOM drivers. | | Error: Initializing Scatter File Failed | The scatter file name was changed or the file is corrupted. Ensure the scatter file has its original, unmodified name and comes from a valid firmware package. | | SP Flash Tool Stuck at 0% (Waiting) | The PC is not detecting the phone. This usually means the VCOM drivers are not installed correctly. Reinstall the drivers and ensure the phone is powered off completely before connecting. | | ERROR: S_DL_GET_DRAM_SETTING_FAIL | Often occurs on newer MTK devices with authentication. It can sometimes be resolved by adjusting the baud rate in the tool's settings or by using a bypass tool. | Key Features The progress bar at the bottom
Better handling of BROM errors and connection issues.
Disconnect your phone and power it on. Note that the initial boot may take up to 10 minutes. Troubleshooting Common Errors Error Code / Message Root Cause