Sh1 94v-0 Datasheet New! Guide

Do not look at the board stamp. Instead, look at the text printed directly on top of the black plastic or ceramic bodies of the individual chips, transistors, or diodes surrounding the damaged area.

: Defined by Underwriters Laboratories (UL 94), this is the highest safety rating for materials subjected to flame tests.

Because "SH1 94V-0" is a combination of a board label and a safety rating, To find the technical specifications, you need to identify the actual component.

The material cannot drip flaming particles that ignite surgical cotton placed underneath the sample. sh1 94v-0 datasheet

The UL 94 standard determines how a material reacts when exposed to a flame. "V-0" is the highest, most stringent vertical burn rating. To achieve a 94V-0 rating, a material must meet the following criteria under laboratory testing:

Always start with the manufacturer:

The SH1.0 series is a wire-to-board connector system. As detailed by YD Connector, these connectors are rated at 1A and 100V , operate from -20°C to +85°C , and feature housings made of LCP (Liquid Crystal Polymer) with UL94V-0 flame retardancy, with contacts in brass and phosphor bronze. Other variants include PA46 UL94V-0 housings, available in configurations from 2 to 7 pins. Do not look at the board stamp

What specific are you trying to fix on the board? Share public link

The material must stop burning within 10 seconds after the flame is removed.

The material must not produce flaming particles or droplets that could ignite surrounding components. Because "SH1 94V-0" is a combination of a

[2†L18-L20]

: If you are looking for an "SH" connector (like the JST SH 1.0mm pitch ), these are common 4-pin or 6-pin headers often used for I2C or power switches.