Remember, data loss is a possibility, and the process is not for the faint of heart. But for the thousands of users who have successfully resurrected their drives, the effort was well worth it. Good luck.
: Right-click FirstChip_MpTools.exe and select "Run as Administrator."
Always download the first. Try to match the release date of the software to the approximate age of your USB drive. If your drive was purchased recently, download the newest version available (e.g., versions released from late 2022 through 2025). Step 3: How to Use the FirstChip FC1178BC MP Tool
: Your drive should appear in one of the numbered slots.
If the download fails mid-process, the drive disappears from Windows Disk Management. firstchip fc1178bc download
A green block appeared. Device 1: FC1178BC [16 GB].
: Click "Start" to begin the firmware flash. This can take anywhere from 30 minutes to several hours depending on the NAND quality.
: FC1178BC (sometimes listed alongside variations like FC1179 or FC1178x) Step 2: FirstChip FC1178BC Download and Tool Selection
Note the "Flash ID" (e.g., Samsung, Hynix, or Micron) as this determines which version of the tool you need. Where to Download FirstChip FC1178BC MPTools Remember, data loss is a possibility, and the
: Downloaded tools usually come in a ZIP or RAR archive. Extract them to a dedicated folder.
This is a common but frustrating error that typically appears late in the process. It means that after writing data to the flash, the verification step failed. This is often due to:
: If the tool doesn't see your drive, try a different USB port (preferably on the back of a PC) or ensure no other flash-related tools are running. specific version of MpTools for a different controller model?
The computer plays the connection sound and assigns a drive letter, but clicking it prompts you to "Insert a disk into USB Drive." Step 1: Verify Your Controller Using ChipGenius : Right-click FirstChip_MpTools
Ultimate FirstChip FC1178BC Download and Flash Tutorial If your USB flash drive suddenly shows "Write Protected," displays "Insert Disk," or reports 0 bytes of available space, it is likely corrupt. For flash drives built with the controller, you can fix these issues completely by reprogramming the firmware using the correct mass production (MP) tool.
: This means the software version you downloaded is older than the memory chips inside your USB. Search for a newer version of the FirstChip MPTools.
Click the Start button on the main screen.
Comprehensive repair, firmware flashing, and low-level formatting.