scheda UNITA' ARCHIVISTICA
The infeed and outfeed tables must be perfectly parallel to one another. The manual instructs how to use a precise straightedge to check for coplanarity. If adjustment is required, the manual guides you through adjusting the eccentric bearings beneath the cast iron tables. Jointer Fence Alignment
Do you need assistance of this specific manual?
If your boards are coming out slightly tapered across their width during thicknessing, the thicknessing bed is not parallel to the cutterhead. The manual provides a detailed sequence to adjust the massive single-column under-table support to bring the bed back into perfect alignment. 4. Maintenance and Cutterhead Care
The thicknessing table may be contaminated with resin. Clean the bed and apply a thin layer of sliding lubricant (such as Felder's Super-Grip or wax). Alternatively, check if the feed roller pressure springs need adjustment. felder ad741 manual new
+-------------------------------------------------------------+ | FELDER AD 741 | +-------------------------------------------------------------+ | [ EMERGENCY ] [ START ] [ STOP ] [ SPEED SELECT ] | | STOP (Green) (Red) (6 / 12) | | | | [ DIGITAL DISPLAY / DIGI-DRIVE ] [ TABLE LOCK ] | | (Height: 000.0 mm) (Pneumatic/Man) | +-------------------------------------------------------------+ Key Control Elements:
When you need support beyond this guide, several resources are available to help you find the information you need:
A: No. The new manual specifies 230V single-phase or 400V three-phase. Running on lower voltage will cook the motor starter. The infeed and outfeed tables must be perfectly
| Specification | Detail | Source | | :--- | :--- | :--- | | | 410 mm (16⅛ in) || | Jointer Table Length | 2,000 mm (78¾ in) || | Max. Planing Height (Thicknessing) | 230 mm (9 in) || | Min.-Max. Workpiece Thickness | 3 - 230 mm (⅛ - 9 in) || | Max. Depth of Cut (Jointer) | 5 mm (13/64 in) || | Cutterblock Options | Standard self-aligning blades; Silent-Power® spiral (optional) || | Number of Knives (Standard) | 4 || | Feed Speed | 6 + 12 m/min (two-stage) || | Dust Extraction Port | 120 mm || | Motor Power | 5.5 kW (7.5 HP) ||
For your reference, the current model (2023 design) typically features: Older (Green) AD-741 Owners Manual PDF - Groups.io
120 mm with 4 knives (standard) or the optional Silent-POWER spiral cutterblock Jointer Fence Alignment Do you need assistance of
Undo the heavy-duty table clamping levers located at the rear of the machine.
Ensure the circuit is protected by a slow-blow fuse or an appropriately rated circuit breaker matching the machine’s nameplate current. Verifying Rotation Direction Clear the cutterblock of any tools or debris.