Monitor the analog ammeter gauge. The needle indicates the current draw. As the battery charges, the needle will slowly drop toward a lower number. 4. Calculating Charging Time
Insert the AC plug into a grounded 120V outlet. The charger will run a self-diagnostic for 3-5 seconds.
The AC-60CR includes self-diagnostic alerts. Here is the official troubleshooting table: autocraft battery charger ac-60cr manual
Example: A 50 Ah battery charged at the 10 Amp setting will take roughly 5 hours to complete.
The battery may have a shorted internal cell. Discontinue charging immediately, as the battery is defective and unsafe to charge. To help find specific answers for your setup, please share: Are you working with a battery? Is the battery inside or outside the vehicle? Monitor the analog ammeter gauge
Do not leave a charging battery completely unattended for extended periods. Overcharging can damage the battery. When the charging process is complete, always turn off the charger and unplug it from the power source before disconnecting the cables. When disconnecting, remove the black clamp first, then the red clamp.
The AC-60CR faceplate features three primary controls: The AC-60CR includes self-diagnostic alerts
Connect the clamp to the positive (+) battery terminal.
When the charging process is complete, reverse the connection order exactly: Unplug the AC power cord from the wall outlet. Remove the clamp from the vehicle's chassis/frame first. Remove the clamp from the battery terminal. 4. Understanding the Ammeter Gauge
The Autocraft Battery Charger AC-60CR is a high-performance battery charger designed to charge 12-volt lead-acid batteries. It is a reliable and efficient charging solution for various applications, including automotive, marine, and industrial uses. This manual provides detailed information on the safe operation, installation, and maintenance of the Autocraft Battery Charger AC-60CR.
: Wipe the battery posts clear of corrosion or grease using a wire brush.