^new^ - Cwfl-6000 Manual

Fill the water tank until the water level gauge needle enters the green zone . 3. Water Pipe Connections

Note: This article is for informational purposes. Always refer to the physical manual provided by the manufacturer (e.g., S&A Teyu) for specific wiring diagrams and warranty terms.

The chiller automatically adjusts the water temperature based on fluctuations in ambient room temperature. This minimizes the risk of condensation forming on your expensive optics when seasonal weather changes. Constant Mode cwfl-6000 manual

Snap them back into place. Never run the chiller permanently without these filters. Every 3 Months: Change the Water Turn off the chiller and laser system.

for their 6000W fiber laser water chiller. While formal "user reviews" of the manual itself are rare, feedback from the industrial laser community and technical documentation databases like highlights several key aspects: Manual Content Overview Safety Precautions Fill the water tank until the water level

Press again to toggle to the high-temperature circuit (optics) and adjust it (typically 28°C–30°C). Press "Rst" to save and apply. 5. Routine Maintenance Schedule

| Feature | CWFL-6000ENW12 | CWFL-6000FNP / ENP | | :--- | :--- | :--- | | | 6000W (nominal) | 6000W | | Temperature Stability | ±1°C | ±1°C | | Control Range | 5°C ~ 35°C | 5°C ~ 35°C | | Power Supply | AC 3P 380V 50Hz | AC 3P 380V 50/60Hz | | Compressor Power | 3.05 kW | 3.05 kW / 4.2 kW | | Tank Capacity | 22 L | 70 L | | Dimensions (L x W x H) | 142 × 73 × 113 cm | 105 × 71 × 136 cm (ENP) | | Weight (Net) | 164 kg | 170 kg | Always refer to the physical manual provided by

: Error codes and alarm state descriptions for flow and temperature issues. Note on "Paper" copies