Smartpack2 Touch User Manual [2025]

| Parameter | Specification | | :--- | :--- | | | 4.4-inch Color LCD / Capacitive Touch / Resolution: 480 x RGB x 272 | | Ethernet Ports | 2 x 10/100 BASE-T (RJ45) | | USB Ports | 2 x USB Type-A (Host) for storage or peripherals | | Serial Ports | RS-232, RS-485 | | Power Consumption | Max: 5.4W / Typical: 2.4W | | Operating Temperature | -20°C to +70°C (-4°F to 158°F) | | Storage Temperature | -40°C to +85°C (-40°F to 185°F) | | Dimensions (W x H x D) | 174 x 78 x 41 mm (Cutout: 153 x 68 mm) | | Protection Rating | IP22 (Indoor Use) |

Enter the IP address shown on the Touch screen into your PC browser.

Select and input the total Ampere-hour (Ah) rating of all parallel strings combined. smartpack2 touch user manual

: Pull the handle's knob slightly outward to open the right side, revealing an SD card slot for firmware updates or setup storage, and a temporary Ethernet port . Default Credentials :

: Eltek Controllers Configuration Guide (2022) . Covers setting float voltages, battery current limits, and network setup across multiple Eltek models . Key Features & Functionality | Parameter | Specification | | :--- | :--- | | | 4

Cause: Rectifier malfunction, incorrect configuration, or sudden load changes.

: Manages rectifiers, battery charging, and alarm relays . : Manages rectifiers, battery charging, and alarm relays

If Static IP is selected, manually enter the , Subnet Mask , and Default Gateway .

The Smartpack2 Touch requires minimal maintenance, but regular checks are recommended. 5.1 Regular Checks Ensure the screen is clean and responsive. Verify that the "Alarm" LED is not flashing. 5.2 Troubleshooting