If the BIOS detects the drive but still yields a boot error, your Windows operating system partition may be corrupt.
An HP NVMe SSD with a "-313-" (or 313) error code is a critical smart analyzer or diagnostic code indicating a hard drive failure or an issue with the NVMe communication interface.
NVMe SSDs run hot. Lack of proper heatsinks or ventilation can cause the drive to temporarily shut down to protect itself.
On a working computer, go to the website. Enter your specific HP serial number or model name. Download the latest BIOS firmware update executable file. hp nvme ssd -313- error
In the world of enterprise and high-performance computing, HP’s NVMe SSDs are generally regarded as reliable workhorses. They offer solid read/write speeds and integrate seamlessly into ProLiant servers. However, if you are reading this review, you likely aren't looking for benchmark numbers. You are likely staring at a blinking amber light and a cryptic message on your iLO dashboard:
If you are within the warranty period, contact HP Support to arrange for a drive replacement.
Firmly slide the drive back into the M.2 slot, replace the screw, and reassemble the casing. Step 5: Repair the Windows Boot Loader If the BIOS detects the drive but still
If you cannot boot, you may need to load the driver onto a bootable USB drive. 2. Use HP PC Hardware Diagnostics Use the built-in tool to identify the exact cause.
Note: If your device is under warranty, opening the chassis may void it. Contact HP support first if applicable.
: A poorly seated drive in the M.2 slot can sometimes trigger communication errors. Lack of proper heatsinks or ventilation can cause
Type the following commands one by one, pressing after each: bootrec /fixmbr bootrec /fixboot bootrec /scanos bootrec /rebuildbcd
The HP NVMe SSD -313- error is an important warning signal that should always be investigated. While it can indicate a serious hardware failure that necessitates drive replacement, it is just as often a resolvable issue stemming from a one-time glitch, outdated firmware, or configuration error. The key to solving the -313- error is methodical diagnosis: starting with HP's own built-in diagnostics to get a clear picture of your drive's health, checking physical connections, and then moving on to BIOS and driver configurations.
Locate the M.2 NVMe SSD (a small, rectangular circuit board flat against the motherboard).
