To save space, you can mount the switch on a wall or under a desk or shelf.
RJ-45 to DB-9 console cable (or USB-to-TTL console adapter, depending on your physical workstation ports).
Then physically unplug both power cords.
Once all other cables are connected, plug the power adapter into the "+5,+12 VDC" port on the back of the router. Then, plug the power cord into a surge-protected power outlet or an uninterruptible power supply (UPS).
Correct physical cabling is necessary to distinguish external wide-area network lines (WAN) from internal enterprise routing environments (LAN). cisco 851710 install
A dedicated chassis ground is mandatory. Locate the double-hole grounding lug on the rear panel before mounting.
Run show version again to ensure the new IOS is active.
: Plug the RJ-45 end of the console cable into the CONSOLE port on the back of the router and the DB-9 end into your PC's serial port.
show version – Confirms the running software version, licensing status, and system uptime. To save space, you can mount the switch
Before handling your enterprise hardware, ensure your workspace satisfies Cisco’s safety, electrical, and environmental guidelines.
: Connect your local network switch to the Ethernet (10/100) port using a standard Ethernet cable.
Reconnect power cords. The chassis PSUs will spin up. The 851710 will enter diagnostics:
: Requires grounding the chassis before power-up to prevent electrical shock. Standard installation involves attaching rack-mount brackets for 2-post or 4-post racks. 📦 Key Features of IOS XE 17.10 If your query is specifically about the software version: Smart Install Concepts - Cisco Once all other cables are connected, plug the
Maintain an ambient temperature between 32°F and 104°F (0°C to 40°C).
: Connect your broadband modem or internet source to the appropriate WAN port.
: Supports a read-only DHCP snooping functionality that only registers DHCPv4 packets.
Ensure you have a console cable, a TFTP server (like Tftpd64), and the correct IOS image file.
