in its default component list, you can add it by downloading custom library files. You can find community-made
This happens if the library folder only contained visual layout footprints but lacked the underlying simulation properties. Ensure you downloaded a library specifically labeled for simulation rather than just PCB footprint routing. If prompted by the component properties window, ensure any required model firmware path is correctly linked. The output values do not change hx711 proteus library download
: Locate the HX711 library files from reputable sources like The Engineering Projects Electronics Tree The Engineering Projects Extract Files : Unzip the downloaded folder to find the DeepBlueMbedded Locate Proteus Library Folder Right-click the Proteus desktop icon and select "Open file location" Navigate to the folder (often found in in its default component list, you can add
Connect the DT and SCK pins to your microcontroller (like an Arduino Uno or PIC). Use the standard HX711.h library in your code to read the serial data. If prompted by the component properties window, ensure
| HX711 Pin | Connect To | |-----------|-------------| | VCC | +5V (Arduino) | | GND | GND (Arduino) | | DT (Data) | Arduino Pin A1 (or any digital pin) | | SCK (Clock) | Arduino Pin A0 | | E+ | Load Cell excitation + | | E- | Load Cell excitation - | | A+ | Load Cell signal + | | A- | Load Cell signal - |
: For writing and compiling the HX711 firmware code.
// Ensure you have the standard HX711 library installed in your Arduino IDE #include "HX711.h" // Define pin connections const int LOADCELL_DOUT_PIN = 2; const int LOADCELL_SCK_PIN = 3; HX711 scale; void setup() Serial.begin(9600); scale.begin(LOADCELL_DOUT_PIN, LOADCELL_SCK_PIN); Serial.println("Initializing virtual HX711 scale..."); scale.set_scale(); scale.tare(); // Reset the scale to 0 Serial.println("Scale ready."); void loop() if (scale.is_ready()) long reading = scale.read(); Serial.print("HX711 Raw Virtual Value: "); Serial.println(reading); else Serial.println("HX711 not found."); delay(1000); Use code with caution. Troubleshooting Common Simulation Issues Error: "Simulation model not found"