Boot the device into stock recovery mode (typically by holding Volume Up + Power). Select Wipe Data / Factory Reset , follow the prompts, and then restart the system.
The status bar at the bottom will shift colors (typically changing from red to yellow or blue), indicating active partition writing. Do not move the phone or touch the cable during this time. bq firmware flash tool windows 10 upd
Before starting the flashing process on Windows 10, ensure you have the following: Boot the device into stock recovery mode (typically
Before you begin, it's strongly advised to adhere to these safety measures: Do not move the phone or touch the cable during this time
Flashing firmware on a BQ device using Windows 10 no longer needs to be a nightmare. The key is using the – specifically SP Flash Tool v5.2208 or newer – alongside properly installed MediaTek/VCOM drivers.