Hp Ms7860 Ver 12 Motherboard Manual New -
LGA 1155 (Supports Intel 2nd and 3rd Gen Core i3/i5/i7) RAM: 2x DDR3 SO-DIMM slots (Non-ECC, up to 16GB) Graphics Interface: 1x MXM slot (Mobile PCI Express Module) Storage: 2x SATA ports (SATA 3.0 and 2.0) Expansion: 1x Mini-PCIe slot (usually for Wi-Fi) 🔌 Pinout and Jumper Guide
Two DDR3 DIMM slots supporting up to 16 GB of 1600 MHz SDRAM. Expansion Slots: (1) PCI Express x16 graphics connector. (3) PCI Express x1 slots.
Jumper (Often needs to be removed or cut for third-party cases).
The motherboard-specific details are located in the "Illustrated Parts & Service Map" section of that document. hp ms7860 ver 12 motherboard manual new
LGA 1150 (Supports Intel 4th Gen Core i3/i5/i7 "Haswell" processors).
:
Unlike standard ATX boards that use a 24-pin power connector, many HP MS-7860 versions use a proprietary 2-connector system LGA 1155 (Supports Intel 2nd and 3rd Gen
| Component | Specification | | :--- | :--- | | | Micro-ATX (24.4 cm x 24.4 cm) | | CPU Socket | LGA 1155 (Supports 2nd & 3rd Gen Intel Core) | | System Memory | 4 x DDR3 DIMM Slots (240-pin) Speeds: 1066 / 1333 / 1600 MHz | | Expansion Slots | 1 x PCI Express x16 (Gen 3.0) 2 x PCI Express x1 1 x PCI (Legacy) | | Storage | 2 x SATA 6.0 Gb/s 4 x SATA 3.0 Gb/s | | Audio | Realtek ALC221 / ALC662 Audio Codec | | LAN | Intel 82579LM or Realtek Gigabit Ethernet | | Video Output | VGA, DVI-D, DisplayPort (Model dependent) |
. Check their support site using your PC’s original Serial Number to find the latest version. Clearing CMOS:
: Pins 8 & 10 (Often used as a chassis detection or "jumper to cut"). HP Support Community compatible CPU upgrade for this board? Jumper (Often needs to be removed or cut
If you are looking for this manual to perform upgrades, keep these constraints in mind:
If you have arrived here searching for the , you are likely in one of two situations: either you are trying to breathe new life into an older HP desktop (such as the HP Pavilion 550 or 500 series), or you are a system builder who has acquired this proprietary motherboard second-hand. The "Ver 12" designation indicates a specific revision of the MS-7860 board, originally manufactured by MSI for HP.
The board features the industrial , pairing extreme daily stability with energy-efficient operation: HP ProDesk 400 G1 Microtower PC - Setup and User Guides
