Disclaimer: Repairing flash drives with production tools is done at your own risk.
: Run MPALL_F1_9000_v370_0E.exe and click Update to find your connected drive.
The interface can be intimidating. Here is the safest way to use it for standard repair. Unzip the folder. Plug in the faulty USB drive. Run MPALL_F1_70_00_V370_0E.exe as Administrator. Step 2: Initial Setup
These controllers were commonly found in various USB 3.0 flash drives from the early to mid-2010s. For instance, a Kingston DataTraveler 3.0 32GB drive was used as a test subject.
: Wiping the drive at a deep level to bypass standard Windows formatting errors.
is a professional production tool used for mass production, low-level formatting, and firmware flashing of USB flash drives equipped with Phison controllers. It is primarily used to repair "Write Protected" errors, fix corrupted file systems that Windows cannot format, or repurpose drives (e.g., creating CD-ROM partitions). Key Technical Details
With the configuration saved, you are ready to attempt the low-level restoration of the drive.
: It relies on .ini files to define the "Flash ID" (FID), controller type, and firmware paths. Common Use Cases
Download a hardware diagnostic tool like or Flash Drive Information Extractor (Innostor) .
MPALL works best on . It is generally advised to use 32-bit systems for maximum compatibility, although it works on 64-bit. 3. Preparation
Re-flashing the controller's instruction set to fix boot failures.
Note: Attempting to use this specific software version on newer Phison controllers (like the PS2251-11/PS2311) or alternative brands (Silicon Motion, Alcor, Silicon Power) may fail or permanently brick the hardware. Step 1: Diagnostics (How to Identify Your USB Controller)
Verify your controller matches the target list for version v3.70.0E. Ensure your software folder contains the correct IDBLK_TIMING.dll library; this file tells MPALL how to interpret your drive's specific NAND flash memory chips. 🚀 Step-by-Step Configuration Guide
: Run MPALL_F1_...exe , load your configuration, and start the flashing process.
Can be used to split a USB drive into secure private areas or create CD-ROM emulated partitions.
Before using the tool, you need to follow a specific process to ensure compatibility and a higher success rate.
Disclaimer: Repairing flash drives with production tools is done at your own risk.
: Run MPALL_F1_9000_v370_0E.exe and click Update to find your connected drive.
The interface can be intimidating. Here is the safest way to use it for standard repair. Unzip the folder. Plug in the faulty USB drive. Run MPALL_F1_70_00_V370_0E.exe as Administrator. Step 2: Initial Setup
These controllers were commonly found in various USB 3.0 flash drives from the early to mid-2010s. For instance, a Kingston DataTraveler 3.0 32GB drive was used as a test subject.
: Wiping the drive at a deep level to bypass standard Windows formatting errors. Phison Mpall V3.70.0e
is a professional production tool used for mass production, low-level formatting, and firmware flashing of USB flash drives equipped with Phison controllers. It is primarily used to repair "Write Protected" errors, fix corrupted file systems that Windows cannot format, or repurpose drives (e.g., creating CD-ROM partitions). Key Technical Details
With the configuration saved, you are ready to attempt the low-level restoration of the drive.
: It relies on .ini files to define the "Flash ID" (FID), controller type, and firmware paths. Common Use Cases
Download a hardware diagnostic tool like or Flash Drive Information Extractor (Innostor) . Disclaimer: Repairing flash drives with production tools is
MPALL works best on . It is generally advised to use 32-bit systems for maximum compatibility, although it works on 64-bit. 3. Preparation
Re-flashing the controller's instruction set to fix boot failures.
Note: Attempting to use this specific software version on newer Phison controllers (like the PS2251-11/PS2311) or alternative brands (Silicon Motion, Alcor, Silicon Power) may fail or permanently brick the hardware. Step 1: Diagnostics (How to Identify Your USB Controller)
Verify your controller matches the target list for version v3.70.0E. Ensure your software folder contains the correct IDBLK_TIMING.dll library; this file tells MPALL how to interpret your drive's specific NAND flash memory chips. 🚀 Step-by-Step Configuration Guide Here is the safest way to use it for standard repair
: Run MPALL_F1_...exe , load your configuration, and start the flashing process.
Can be used to split a USB drive into secure private areas or create CD-ROM emulated partitions.
Before using the tool, you need to follow a specific process to ensure compatibility and a higher success rate.