Remove the battery if the device won't be used for over a month.
: Short-press turns the tool on; long-press turns it off.
: Remove the battery if the device will not be used for an extended period to prevent leakage.
0.2 meters to 40 meters (8 inches to 131 feet) Physical Tape Range: 5 meters (16 feet) Laser Accuracy: ±2 millimeters (±1/16 inch) Screen Type: Backlit LCD Display Battery Type: 2x 1.5V AAA Batteries Laser Class: Class II, Point-N-Measure Digital Tape W5746 User Manual
Here’s why that’s interesting in practice:
Now I will start writing. Your Comprehensive Guide to the Point-N-Measure Digital Tape W5746
Before using your W5746, please read and observe the following safety precautions to ensure safe and proper use: Remove the battery if the device won't be
The Point-N-Measure Digital Tape W5746 is backed by a limited warranty covering manufacturing defects in materials and workmanship for a period of 90 days from the date of original purchase. This warranty does not cover damage resulting from misuse, accidental dropping, exposure to harsh chemicals, or normal wear and tear of the tape blade.
How To Use A Digital Tape Measure | Engineer Supply - EngineerSupply
This comprehensive manual provides technical specifications, step-by-step operating instructions, calibration procedures, and safety guidelines to help you maximize the utility of your W5746. 1. Technical Specifications How To Use A Digital Tape Measure |
Wait, the user mentioned "Point-N-Measure". That suggests a target acquisition system. Maybe the device uses a laser beam to focus on a specific point. The manual should explain how to position the tool, where to aim, and how it calculates the distance. Also, note if it's measuring to a surface or to a specific object point.
Press the physical lock button on the bottom of the casing to secure the blade position. Maintenance and Care
Battery InstallationSlide the battery compartment cover off at the back of the unit.Connect a fresh 9V battery to the terminals.Replace the cover securely.
Insert the required batteries (typically one 9V battery or two AAA batteries, depending on the production series), noting the correct polarity (+/- markings). Snap the battery cover securely back into place.
Continuous MeasurementHold down the READ button while moving the device to see real-time distance updates on the display. Advanced Calculations Calculating Area (Square Footage) Press the AREA button. Measure the length of the room. Press the AREA button again. Measure the width of the room. The device will automatically display the total area. Calculating Volume (Cubic Space) Press the VOL button. Measure the length. Press VOL and measure the width. Press VOL and measure the height. The total cubic measurement will appear on the display.
