Extract the downloaded driver zip file from GSM Forum to your desktop.
Re-run the manual driver installation, ensuring you selected the 64-bit compatible driver.
Without this driver, the SP Flash Tool will show "BROM Error" or fail to recognize the phone. Where to Find the Drivers (GSM Forum Link)
: If the phone isn't recognized, try holding Volume Up + Down while connecting the USB cable to force BROM mode .
The is a highly popular MediaTek-powered (MTK) feature phone. It requires specific 64-bit USB drivers to establish a secure flashing connection with modern Windows PCs. nokia rm1035 mtk usb driver 64 bit gsm forum link
An MTK USB driver is a software interface that allows your Windows computer to communicate with your phone's MediaTek processor. Unlike a standard USB driver used for simple file transfers, the MTK VCOM (Virtual COM port) driver is essential for low-level, advanced operations:
This is the most critical part. Even with the right driver, Windows 64-bit blocks unsigned kernel drivers by default.
Another valuable resource is the , which maintains a comprehensive list of MediaTek drivers, including a link specifically labeled "MTK USB Serial Port Drivers (for Nokia MTK devices)" . This is a strong signal that the driver found there is a good candidate for your Nokia 130.
For Windows 10/11 64-bit:
Look for verified threads pinned by senior forum moderators or recognized contributors.
Open your browser and navigate to the official GSM Forum website.
The GSM community has maintained specialized drivers for these older "Nokia MTK" feature phones for years. The following links are frequently cited on the GSM-Forum (GSMHosting) :
When performing a firmware flash, repair, or unlocking an IMEI on an MTK device, standard consumer USB cables fail to interface correctly without a specialized virtual COM port driver. Extract the downloaded driver zip file from GSM
Upon reboot, press or F7 on your keyboard to select "Disable driver signature enforcement". Step-by-Step Driver Installation Guide
Try a different USB port (preferably a USB 2.0 port) or a different micro-USB cable. Pre-set Code:
to a computer requires the correct MediaTek (MTK) drivers to enable flashing, repairing, or data transfer. Understanding Nokia RM-1035 Hardware Nokia 130 (Model RM-1035) Go to product viewer dialog for this item.
You must be logged in to post a comment.