Restart your computer and enter the BIOS/UEFI menu (usually by tapping F2, F10, or Delete during boot). Navigate to the or Advanced tab and configure the following:
By combining APC’s power management software with WoL, you gain precise control:
Once power is restored, you can VPN into your network and issue a command from these devices to your server's MAC address. Home Automation (DIY Alternative): Some users integrate an apc ups wake on lan best
Access the NMC via its web interface (using DHCP or static IP).
If utility power flickers on and off rapidly, a server set to automatically restart may boot up immediately, only to be violently crashed by a second power drop before the UPS battery can recharge. Restart your computer and enter the BIOS/UEFI menu
: To maintain battery health and ensure the NIC has standby power, always keep your APC UPS plugged into a live wall outlet, even when the computer is off. Essential Configuration Steps
The OS must allow the network adapter to enter a low-power listening state without fully shutting down its power pins. For Windows Server / Windows 10 & 11: Right-click the Start menu and open . If utility power flickers on and off rapidly,
APC (American Power Conversion) UPS (Uninterruptible Power Supply) devices are widely used to provide backup power to critical infrastructure, such as servers and network equipment. One of the advanced features offered by APC UPS devices is Wake on LAN (WOL), which allows administrators to remotely wake up or turn on servers and other devices over a network. In this guide, we'll explore the best practices and configurations for using APC UPS Wake on LAN.
Ensure the target computer has a static IP address. Keep a written or digital log of the machine's MAC address, as the Magic Packet relies completely on the MAC address to find the target hardware.
You cannot achieve a reliable WoL setup with just any hardware. You need components that maintain a "standby" power state even when the computer is technically turned off. 1. The Right APC UPS
Many modern APC Smart-UPS models come with a built-in Ethernet port labeled . This allows you to plug your UPS directly into your router or switch. You can then monitor power status, receive proactive email notifications, and interact with the UPS via the cloud. 2. The Network Management Card (NMC)
()
